Wholesale Tin Coated SPTE T3 T4 2.8/2.8 Mr SPCC Tin Plate Roll Price Tinplate Sheet Coil

• After-sales Service: Available
• Warranty: 10 Years
• Type: Steel Coil
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Certification: ISO, CE
• Surface Treatment: Tin Plating / Color Coating
• Application: Metal Packing / Crwon Cap / Food Packing
• Special Use: Metal Packing / Crwon Cap / Food Packing
• Stock: Stock
• Surface Finish: B(Bright) R(Stone) S(Silver) Gold Lacqure
• Materia: Mr SPCC
• Tin Coating: 1.1/1.1 2.0/2.0 2.8/2.8 5.6/5.6 (G/M2)
• Processing Service: Bending, Welding, Decoiling, Punching, Cutting
• Shape: Customized Shape
• Transport Package: Standard Sea Worthy Packing
• Trademark: Jichang
• Origin: China
• Production Capacity: 50000 Metric Ton/Metric Tons Per Month

Product Description

Tinplate Tinplate 2.8/2.8 8.4/8.4 Coil/Sheet Electrolytic Tinplate ETP SPTE SPCC Food Grade

 

Detailed Photos

Tin plated coil/plate

  Tinplate (commonly known as tinplate) refers to a steel plate with a thin layer of metallic tin plated on the surface. Tinplate is a low carbon steel rolled into a steel plate with a thickness of about 2mm, after pickling, cold rolling, electrolytic cleaning and annealing, leveling, trimming, and then cleaning, electroplating, reflow, passivation, and oiling. Cut into finished products of tin-plated sheet, and the tin used for tin-plated sheet is high-purity tin (Sn>99.8%). The tin layer can also be coated by hot dip plating. The tin layer of the tin plate obtained by this method is thicker, and the amount of tin used is large, and no purification treatment is required after tin plating.

Advantage

1. Low pollution

Tinplate, the main raw material in tin can containers, is in fact environmentally harmless and can be decomposed naturally.

 

 

2. Recyclable

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.

 

 

3. Customized size

We accept customers and customer agents to inspect the goods and measure the size at any time.

Product Description

 

Available Sizes
Item	Coil	Sheet	Tolerance
Annealing	BA/ CA	BA/ CA	-
Thickness	0.14 - 0.55 mm	0.14 - 0.55 mm	± 3%
Width	700 - 1,050 mm	700 - 1,050 mm	-0/ +2mm
Length	-	500 - 1,200 mm	-0/ +2mm
Weight	3 - 15 MT per coil	2 MT Max per bundle	± 0.3%
Inside Diameter	420/ 508 mm	-	± 10mm
Outside Diameter	1,800 mm	-	-

 

Remark	Temper			Hardness (HR30T)	Yield Strength (Mpa)	Features	Typical Application
	JIS G3303-2008	ASTM A623M-06a	DIN EN10202-2001
Single Reduced (SR)	T-1	T49	TS230	49 ± 3	230 ±50	Deep drawing which requires large flexibility.	Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter.
	T-2	T53	TS245	53 ± 3	245 ±50	Moderate drawing with some stiffness.	Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can.
	T-2.5	T54	TS260	55 ± 3	260 ±50	Combines the drawability of T-2 and the stiffness of T-3.	Battery shells, small can ends and bodies
	T-3	T57	TS275	57 ± 3	275 ±50	Shallow drawing, proper stiffness to minimize fluting and prevent buckling.	Top and bottom of cans, can ends and bodies, large diameter closures, crown caps.
	T-3.5	T59	TS290	59 ± 3	290 ±50	Items that require better formability than T-4.	General use, pail, 18L, 4L
	T-4	T61	TH415	61 ± 3	415 ±50	Moederate forming. Moderate (comparatively large) stiffness.	Can bodies and ends, crown caps, closures. Body and end for small can.
	T-5	T65	TH435	65 ± 3	435 ±50	High Stifness, excellent buckling resistance. Increased stiffness to resist buckling.	Can ends and bodies requiring intensity. Body and end for small can.
Double Reduced (DR)	DR-7M	T71	TH520	71 ± 5	520 ±50	Moderate strength and stiffness with moderate forming.	DRD bodies, dome, Lug cap & 3 piece bodies
	DR-8	T72	TH550	73 ± 5	550 ±50	High strength and stiffness.	DRD bodies, end, Lug cap & 3 piece bodies
	DR-8M	T73	TH580	73 ± 5	580 ±50
	DR-9	T75	TH620	76 ± 5	620 ±50	Higher strength and stiffness.	DRD bodies, Lug cap & 3 piece bodies Thnner guage body, end, DRD cans, caps.
	DR-9M	T76	-	77 ± 5	660 ±50
	DR-10	-	-	80 ± 5	690 ±50	Very large stiffness and strength	DRD bodies, Lug cap & 3 piece bodies Thnner guage body, end, DRD cans, caps.
Note: Making cans with DR materials, please pay a special attention to the rolling direction.

Parameter Specification 

1. Type of Steel
MR	It contains few residual minor constituents and has good corrosion resistance.
	It is widely used for the applications of containers.
L	It contains particularly few residual minor constituents as Cu, Ni, Cr, Mn.
	It is suitable for the materials of containers requiring improved corrosion resistance.
D	It is an aluminum killed steel. It is suitable for the applications.
	that bear deep drawing or other workings which may produce Luder's lines patterns.

  

2. Surface finish
Product Finish	Code		Steel base	Product	Flow-melted	Nominal surface roughness of the steel base
	Euro	China				Ra (μm)
Bright	BR	B	smooth	Tinplate	Yes	≤ 0.35
Fine stone	FS	R	fine stone	Tinplate	Yes	0.25 - 0.45
Stone	ST	R2	stone	Tinplate	Yes	0.35 - 0.60
Silver	SG	S	shot blast	Tinplate	Yes	≥ 0.90
Matt	MM	M	shot blast	Tinplate	No	Various
Fine stone	FS	R2	fine stone	TFS/ ECCS	-	0.25 - 0.45
Stone	ST	R1	stone	TFS/ ECCS	-	0.35 - 0.60
Note 1	Double reduced product is only supplied as stone finish
Note 2	Sub-classfied based on the surface finishing of the blackplate.
Note 3	The appearance is governed by:
a)	the surface characteristics of the steel base which principally result from controlled preparation of the work rolls used during the final stages of temper rolling;
b)	the mass of the coating applied; and
c)	whether the tin layer is flow-melted or unflow-melted.
Surface finish	Characteristic
Bright finish	Glazed surface obtained after melting treatment of electrotinned smooth raw materail strip with extremely fine rubstone fingure by processing.
Stone finish	Glazed surface obtained after melting treatment of electrotinned smooth raw materail stripfeaturing certain rubstone figures.
Silver finish	Glazed surface obtained after melting treatment of electrotinned smooth raw material strip with rough matt furface.
Matte finish	Matt surface of general matt raw material strip without melting treatment.

 

3. Coating Weight
1) Tinplate (ETP)
	Former Coating	Coating Weight	Nominal Coating Weight	Minimum average
	Designation	Code	(g/m2)	(g/m2)
Equally Coated	10#	1.1/ 1.1	1.1/ 1.1	0.9/ 0.9
	20#	2.2/ 2.2	2.2/ 2.2	1.8/ 1.8
	25#	2.8/ 2.8	2.8/ 2.8	2.5/ 2.5
	50#	5.6/ 5.6	5.6/ 5.6	5.2/ 5.2
	75#	8.4/ 8.4	8.4/ 8.4	7.8/ 7.8
	100#	11.2/ 11.2	11.2/ 11.2	10.1/ 10.1
Differentially Coated	25#/ 10#	2.8/ 1.1	2.8/ 1.1	2.5/ 0.9
	50#/ 10#	5.6/ 1.1	5.6/ 1.1	5.2/ 0.9
	50#/ 25#	5.6/ 2.8	5.6/ 2.8	5.2/ 2.5
	75#/ 25#	8.4/ 2.8	8.4/ 2.8	7.8/ 2.5
	75#/ 50#	8.4/ 5.6	8.4/ 5.6	7.8/ 5.2
	100#/ 25#	11.2/ 2.8	11.2/ 2.8	10.1/ 2.5
	100#/ 50#	11.2/ 5.6	11.2/ 5.6	10.1/ 5.2
	100#/ 75#	11.2/ 8.4	11.2/ 8.4	10.1/ 7.8
	125#/ 50#	15.1/ 5.6	15.1/ 5.6	13.9/ 5.2
Differential Marking
a) Edge Marking : Low Coating Side with interrupted lines
b) Line Marking : Heavy Coating Side with continuous lines
c) Tin coating weight can be flexibly adjusted according to customer's requirement

 

4. Passivation
Item	Chromium weight - Min	Chromium weight - Max
	(mg/m2) - Each Side	(mg/m2) - Each Side
Code 311	3.5	9.0
Code 300	1.0	3.0
Notes	1) Passivation applys to Tinplate only.
	2) Code 311 is the most widely used passivation.
	3) Code 300 is a simple chemical dip treatment.

 

5. Oiling
Item	Oil Weight	Aim Oil Weight
	(mg/m2) - Each Side	(mg/m2) - Each Side
Slightly	1.0 - 3.5	2.5
Normal	3.0 - 6.0	4.5
Medium	6.0 - 9.0	7.5
Light Heavy	7.0 - 11.0	8.5
Heavy	10.0 Min	9.5
Remarks:	Tinplate and TFS are electro statically oiled with DOS (Di-Octyl-Sebacate).

Application

Tin-plate packaging has a wide range of coverage in the packaging industry because of its good sealing, preservation, light-proof, ruggedness and unique metal decoration charm. Because of its strong antioxidant, diverse styles and exquisite printing, tinplate packaging container is popular with customers, and widely used in food packaging, pharmaceutical packaging, commodity packaging, instrument packaging, industrial packaging and so on.

Packaging & Shipping

Package	Standard export seaworthy package,suit for all kinds of transport, or as required.
	Water-proof Paper + Edge protection + Wooden Pallets
Bulk Size	Any size
Loading Port	Tianjin, Qingdao Port or any China Seaport
Container	1*20ft container load Max. 25 Ton, Max. length 5.8m
	1*40ft container load Max. 25 Ton, Max. Length 11.8m
Delivery Time	7-15 days or according to the order's quantity

Certifications

Company Profile

After Sales Service

Our Service

Pre-sale Service:

1.Samples can be offered with courier fee by buyer's side.
2.Good quality + Factory price + Quick response + Reliable service
3.100% responsible for the quality:all the products are produced by our professional workman and we have a high-work-effect foreigh trade team.
4.We have enough stock and can deliver in short time.
5.Customized designs,colors,sizes and logos are welcome,responsiveness to customers' requirements.

After-sale Service:
1.We will count cheapest shipping cost and make invoice to you at once.
2.On time delivery.
3.Provide real pictuers of loading container,email you the tracking NO. and help to chase the products until the goods arrive you.
4.24 hours online service,if any question,please contact us at anytime in your convinence.

FAQ

Q1:What are your company's main products ?

A1: Our main products are stainless steel/carbon/galvanized plate/sheet, coil, round/square pipe, bar, channel, etc.

Q2. How do you control quality ?
A2: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q3. What are the advantages of your company ?
A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other steel companies

Q4. How many coutries you already exported ?
A4: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Turkey, Jordan,India, etc.

Q5. Can you provide sample ?
A5: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days.